Code: ETOPM10609
Atomic Absorption Spectrometer Double Beam.
Double beam atomic absorption spectrometer complete system
Double beam automatic atomic absorption spectrometer with background corrector , operating by data station, control running under windows soft ware, . Spectrometer and accessories are controlled by PC data station. Light source single or multidimensional hollow caltode lamp/ wave length 180 nm to 900 nm, reader concentration and absorbance. Standard hear control provider automatic ignition, power failure protection, burner inter lock, flame sensor, Individual flow meter for fuel and oxidant, fuel gear flow set precision needle valve, power oxidant change over is soft ware controlled, nitrous oxide and acetylene burner.automatic ignition, power failure protection, burner inter lock, flame sensor, Individual flow meter for fuel and oxidant, fuel gear flow set precision needle valve, power oxidant change over is soft ware controlled, nitrous oxide and acetylene burner. DATA STATION: Intel® Core™2 Q6600 Quad-Core (8MB L2 cache,2.4GHz,1066FSB), Optical Drive Dual Drives: 16x DVD-ROM Drive + 16x DVD+/-RW w/ dbl layer write capable, , Memory , 4GB, 3 Dual Channel DDR2 SDRAM at 800MHz - 4 DIMMs, Hard Drive 500GB4 - 7200RPM, SATA 3.0Gb/s, 16MB Cache, with 17" LCD -Sodium (Na) 4monitor. AIR COMPRESSOR: Air compressor Oil free compressor of free air capacity, for 220V/240V 50/60Hz Fume HOOD-Fume hood for AAS HOLLOW CATHODE LAMPS FOR AAS- -Sodium (Na) 4 ,Potassium (K), 4- Calcium (Ca) 4_, Magnesium (Mg) 4- Iron (Fe) 4-Manganese (Man) 4-Alumnuium (Al) 4- Copper (Cu) – 4- Zinc (Zn)- 4- Cadmium (id) 1- Nickel (Ni) 1 - Molybdenium (MB) 1- Cobalt (co) 1-Lead (pb) 1- Arsenic (As) 1-Selenium (Se) 1 ACCESSORIES ;-Acetylene cylinder with gas and regulator, acetylene cylinder hose with fittings, nitrous oxide cylinder with gear and regulator, Nitrous oxide hose and fittings, acetylene gas filter SPARE PARTS :- Fuse, Deutrium lamp 100 mm slot burner ,Inert universal burner 50 mm Capillary tubing 0.4 mm boreCapillary tubing0.5 mm bore with dust cover Operational manual and electrical diagram Installation, testing, commissioning and instrument training by qualified engineer during commissioning is required