Code: ETOPM10276
CRYSTALLISATION UNIT.
Specification
• Benchtop metal frame unit, Clear crystalliser vessel, Hot water vessel with PID control loop, 3 temperature sensors, Conductivity probe, Non-corrosive baffle and impeller blades, USB port for data logging using the Armfield software, Set of sieves for determining crystal size distribution
• Comprehensive instruction manual with detailed laboratory teaching exercises
• Isolating switch on the console, Plastic bung with silicone sleeve
• Low liquid level sensor on the hot water vessel, Hot and cold water pumps
• 3-litre beaker for collecting crystals and mother liquor
Continuous Feed Accessory: A benchtop unit comprising an ABS plastic plinth with integral electrical console onto which is mounted the stirred acrylic feed tank, with the heater and peristaltic pump . • A temperature sensor and 2.5kW heater mounted
in the feed tank and linked to a PID controller for accurate solution temperature control
• A peristaltic pump, used to feed solution from the 20-litre feed tank to the reactor
Buchner Filtration Kit: An ejector / vacuum system, Filter paper, Funnel, Rubber tubing, Rubber bung,Buchner.
Technical data
• 2-litre jacketed crystallisation vessel, Hot water pump, Flow meter 0.05-3 l/min, 3 temperature sensors, Conductivity probe 0-600mS, Low-level liquid sensor, Cold water supply pressure regulator, Heater capacity 2kW, Pressure regulator 0-2 bar
OVERALL DIMENSIONS - Height: 0.8m* 0.69m* 0.5m for crystalization unit
Length: 0.9m *1m* 0.5m for continoues feed accessory
Depth: 0.5m* 0.5m* 0.5m for filtration kit Supplied with THEORETICAL – EXPERIMENTAL HANDBOOK