Code: ETOPM10279
FIXED BED ADSORPTION UNIT.
specification
bench top unit comprising a vacuum formed ABS plastic plinth with integral electrical console onto which is mounted the stainless steel, packed
fixed bed adsorption column, hot water circulation system and infrared detector
• The hot water circulation system connected to the column jacket enables automatic control of temperature adsorption to a setpoint value
• Gas feed flow rate can be controlled between 0 and 5 l/min
• The bed adsorption column has the following specifications:
- Height 325 mm, diameter 58 mm, - Stainless steel jacket for temperature
control, - Gas distribution plate at entry to column, - Bed of glass beads for good gas distribution and maintenance of steady state temperature
- Six thermocouples spaced evenly along, the length of the column
• All electrical circuits are protected by appropriate safety devices
• The control console incorporates an electronic display: PID controller display, including thesetpoint temperature
• USB interface and sophisticated data logging
technical details
Operation pressure: 0-0.5 bars, Gas flow rates: 0 < 5 SLPM (He) 0 < 1 SLPM (CO2)
Column capacity: 480 cm³, Gases: CO2 , He, Relief valve pressure: 20 psi
Column operating temperature: 25 - 45°C OVERALL DIMENSIONS
Height: 0.60m, Width: 0.50m, Depth: 1.00m
Supplied with THEORETICAL – EXPERIMENTAL HANDBOOK