Frame
The frame is of all steel construction, fabricated from rolled
steel plates with suitable cross ribbings. Presses up to 30T will be
supplied with C.I. legs. Proper alignment of the frame is ensured by
machining. The structure is designed for perfectly balanced distribution
of stress over the cross section eliminating deflection &
vibration, in result increased tool & machine life.
Clutch
The clutches of pin/rolling key-type and well supported with
high rigidity. The Clutch is made of special alloy steel, the pin /
rolling key is manufactured from W.P.S. / EN24 material & with
proper heat treatment to ensure trouble free long life & give
continues stroke for mass production.
Crank Shaft
The Crank shaft is made of special alloy steel with precisely
machined to grind finish having closed accuracy and fitted in bronze
bushes for smooth working, longer life with consistent performance.
Adjustable Stroke
The unique feature of adjustable stroke enables the press to
perform all kinds of operations by employing short stroke for blanking
and forming operation.
Flywheel
Properly sized flywheel is made of high grade cast iron, for
storing and releasing adequate energy for the pressing operation, and
properly balanced for smooth running.
Gears
Gears are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.
RAM & BED
Ram Slides is made of high grade heavy duty cast iron &
properly seasoned, aligned & fitted with Hylum Sheet on back side
for friction free travel through slides, ensuring longer life of die and
easy operation. Bed is made of high grade heavy duty cast iron &
properly seasoned & properly aligned with ram to obtain high
accuracy and precision press operation.
Standard Accessories
- Motor Pulley
- Slide Adj. Spanner
- Fly wheel & Gear guard
- Oil cups for lubrication point.
- Knock -out system
Optional Accessories
- Tow hand operated clutch.
- Single /Continuous stroke
- Automatic lubrication pump
- Electric motor, Starter and V-belts
- Extra base plate
- Inclinable type
| CAPACITY IN TONS |
|
5 |
10 |
20 |
30 |
40 |
50 |
| Crankshaft Diameter |
MM |
70 |
88 |
115 |
130 |
135 |
140 |
| Adj. Stroke Length |
MM |
38 |
50 |
63 |
76 |
76 |
89 |
| Adjustment of Ram |
MM |
25 |
25 |
25 |
25 |
25 |
25 |
| Punch Hole in Ram |
MM |
25 |
25 |
32 |
38 |
38 |
45 |
| Hole in Bed |
MM |
63 |
76 |
82 |
89 |
95 |
101 |
| Bed Size : (Length x Width) |
MM |
381 X 254 |
457 X 304 |
660 X 380 |
762 X 431 |
785 X 482 |
810 X 507 |
| Bed Thickness |
MM |
100 |
112 |
140 |
152 |
165 |
177 |
| Dist. between bed to Ram |
MM |
177 |
204 |
250 |
292 |
320 |
350 |
| Flywheel Dia. |
MM |
406 |
458 |
482 |
533 |
584 |
660 |
| Strokes per minute |
MM |
80 |
70 |
45 |
40 |
35 |
35 |
| Motor Power (HP)-1440 RPM |
|
1 |
1.5 |
2 |
3 |
4 |
5 |
| Floor To Top of Bed |
MM |
700 |
830 |
830 |
880 |
1000 |
1000 |
ISO 9001:2015
