Knee-and-column type Horizontal Milling machine.

Descriptions

1. Heavy duty model and high column.
2. Various arbors, collets and adaptors are according to the size of the standard cutters mentioned below

3. 380 VAC 50/60 HZ and 6-10 HP Motor.

4. Automatic powered table elevation with safety switch.
5. Electric control box.
6. Halogen work lamp.
7. Auto-lubrication.

8. Hardened & ground cross slide way and table.
9. Chrome hardened, ground quill.
10. High precision 7210 CP4 spindle bearings.
11. Turcite-B coasted on the cross and longitudinal way.
12. Hardened & ground knee slide way.
13. Square way-Y, Z axis.
14. Dovetail way-X axis.

 Specifications

1.   Spindle:
(1) Spindle taper: NST40.
(2) Spindle speeds: 70-3600 RPM (10 speeds).
(3) Quill diameter: 100mm.
(4) Quill travel: 150mm.
(5) Quill feeds: 0.04mm, 0.08mm, 0.15mm.

6. Variable speeds from 16 to 20

2. Table:
(1) Table size: 1250 x 250mm. and table movement is by hand & with power
(2) Longitudinal travel(X): 850-950mm.
(3) Cross travel(Y): 420mm.
(4) Vertical travel (Z): 508mm.
(5) T-slot (width x trough number x pitch): 16mm x 3 x 65mm.

RAM:
(1) Ram travel: up to 700mm.

3. Attachments:

1. Plain Vise

2. Swivel vise

3. Universal vise

4. Simple indexing head

5. Universal indexing head

6. Vertical milling attachment

7. Universal spiral attachment

8. Gear cutting attachment

9. Circular milling attachment

10. Rack milling attachment

4. milling cutter (5 pieces from each)

      1. light-duty milling cutters 20 mm thick and straight teeth 

     2. light-duty milling cutters with helical teeth at 25^o

    3. heavy-duty plain milling cutters 75-100mm diam.

    4. Helical plain milling cutters 45^o and 60^o helix.

   5. Side milling cutters (Plain side, half side and staggered-tooth)

   6. Metal slitting saws (Plain and staggered-tooth)

    7.  Angular milling cutter (Single and double angle)

    8.  End milling cutters (2-fluted single end, 2-flute double end, 3-flute single end, multiple-flute single end, 4-flute double end, 2-flue ball-end, carbide-tipped straight flutes, carbide-tipped RH helical flutes, multiple-flute with taper shank, carbide-tipped with taper shank and helical flutes)

   9. Shell end mill

   10. Face milling cutter

  11.  T-slot cutter (Nominal size = 10,12, 14 and 18)

  12. Woodruff key seat cutter (Diameter = 50, 63, and 80 mm)

  13. Concave milling cutter (Diameter = 56, 63, 70, 80, 90 mm size)

  14. Convex milling cutter (Diameter = 50, 56, 63, and 70 mm)

  15. Corner rounding milling cutter (Diameter = 56, 63, 70, 80, 90 mm size)

  16. Dove tail cutter (60^o)

  17. Gear milling cutters (Module No. =1.5, 2, 2.5, 3, 4, 5, 6, 8, 10)

  18. Fluting cutters

  19. Special formed cutters (for different type of gear forms)