Code: TIE0006
Single Cylinder Four Stroke Diesel Engine Test Rig.
Introduction
The test rig is designed to provide self-contained facility for teaching
Compression Ignition engine principles. The equipment is instrumented
so that the following experiments could be performed.
1). Bhp Measurement
2). Brake Thermal Efficiency
3). Fuel Consumption Measuement
4). Air Intake Measurement
The engine test rig facilitate to evaluate the following:
1). Heat Balance Sheet.
2). BHP Measurement from no load to full load.
Description
Two main components from main parts of the test rig. Welded steel base
plate, complete with Rope Brake Dynamometer provided with cooling water
arrangement. Panel board positioned over the base plate consisting of
fuel system with flow measurement by burette, air flow measurement
system, temperature and speed indicator.
Dynamometer (as applicable)
1). The Dynamometer used is a Mechanical Brake capable of absorbing a maximum load of 6HP @ 650 RPM/8 HP @ 850RPM
Instrumentation
The following instrumentation is provided.
'U' tube manometer for air flow rate
Burette for fuel flow rate
Digital Temperature Indicator-Multi point indicator with thermocouples.
Controls
The test rig is arranged for manual control with Hand cranking start arrangement for engine starting.
Fuel measuring arrangement
Fuel Measuring Arrangement consists of fuel tank, burette and suitable
cock all mounted on a suitable framework and panel board and supplied
with fuel piping from fuel tank to Engine.
Air intake measurement & heat carried away by exhaust gas
Consisting of an air tank mounted on an iron stand fitted with a
suitable orifice plate, manometer, Thermocouple for measuring the
exhaust gas temperature with pocket connection with instruments suitably
mounted on a panel board.
Heat carried away by cooling water
Consists of suitable inlet and outlet piping with flow control valve.
Rota meter to measure the rate of flow of cooling water and Thermocouple
with pocket connections for measuring inlet and outlet water
temperature.
Engine
Single Cylinder Four Stroke Water Cooled Vertical Diesel Engine to develop 6 HP @ 650 RPM./8 HP @ 850 RPM. (Make: Kirloskar)
Services
Electrical supply of 230V, Single Phase, 50Hz AC & external cooling water supply.