lab@motestainstruments.com | Civil and Mechanical Engineering Lab Equipments India China
lab@motestainstruments.com | Civil and Mechanical Engineering Lab Equipments India China
Code: CNC-MTM-0008
CNC Mill Trainer.
CNC Mill Trainer.
MT 250 is based on stepper motors and stepper drives. This is our
highest selling model (Among CNC Milling Trainer Machines) in Indian
subcontinent. Rigid design and PLC based technology gives this machine a
technological advantage over its competitors.
Complete independence from computer (No I/O card used) prevents this machine from any issues related with electrical supply (Noise and Spikes). Down time of PLC based machines is 90% less as compared to other computer (I/O Card) based machines.
Also, machines to be
operated remotely. Hence problem detection and eventual solution can be
attained within minutes.
Specifications:
| Axis Motor and Drive | Stepper Motor with Stepper Drives |
| X Axis | 300 mm |
| Y Axis | 225 mm |
| Z Axis | 250 mm |
| 4th Axis Provision (Optional) | Provided |
| Table top to Spindle Nose distance | 70 - 370 mm |
| Spindle to column distance | 270 mm |
| Feed Rate | 0 to 1,200 mm/min |
| Rapid Travel | 1,200 mm/min |
| Table Size | 560 x 220 mm |
| T Slot | 3 x 10 x 50 |
| Load on Table | 120 Kg |
| Spindle Motor Capacity | 2 HP |
| Spindle Nose Taper | ISO 30 / BT 30 |
| Spindle RPM | 100 to 3000 RPM |
| Controller | CutViewer-United Kingdom |
| Control System | PLC Based Control System |
| Operating Software | CutViewer - United Kingdom |
| Positioning | 0.010 mm |
| Repeatability | +- 0.015 mm |
| Resolution | 0.010 mm |
| 4th Axis Resolution (Optional) | 0.02 Degrees |
| Tool Changer | Automatic |
| No. of Tools | 8 |
| Maximum Tool Length | 40 mm |
| Maximum Tool Dia. | 16 mm |
| Actuation | Hydraulic (Compressor not required) |
| Interpolation | Linear / Circular / Parabolic |
| Pocket & Helical Milling | Provided with standard codes |
| Dimension in mm | 1300 x 1100 x 1900 mm |
