COMPLETE TRAINING SYSTEM FOR CONSTRUCTIVE ASPECTS OF ELECTRICAL MACHINES.
with training and installation
Each system must be composed minimally by the following components:
    Three-phase stator
•    Stator of a 0.3 kW three-phase machine as functional model, built with a bearing shield and industrial connecting box, electrically functional, mounted on a base socket.
•    The stator is designed to accommodate different rotors and is equipped with two handles to fix this.
    Squirrel Cage Rotor
•    Rotor of a 0.3 kW three-phase asynchronous machine with pull-out torque
    Slip-ring rotor
    Salient pole rotor
    Smooth core rotor
    Reluctance rotor
•    Rotor of 0.3 kW of three-phase synchronous machine with reluctance rotor as a view model, applicable in the machine model-stator.
    DC shunt stator
•    Stator of 0.3 kW of DC shunt current machine as a view model, constructed with A-camp sign and industrial clamp castes (without electric function) on a base mounts.
•    The stator is admission of different rotors and is equipped with star clutch-train bolt to fasten this.
    DC rotor
Rotor for DC machine in the form of a working model demonstrating function.
With visible collector, brush holder as well as the brushes.
The rotor designneed to fit with the DC stators.
    Efficiency rotor
Rotor of a 0.3 kW three-phase asynchronous machine with copper cage as a functional model
The rotor design need to fit with the DC stators.
    Machine Test System
    Computer based Data Acquisition system with software
-Software for recording the characteristics of Electrical Machines
    Adjustable transformer 0...260 V, 4 A
- Mains voltage: 230 V, ± 10 %, 50...60 Hz
- Output: 1 x 260 V / 4 A AC
- Output: 2 4-mm safety sockets with connecting leads and shock-proof plug 16 A
    Three-Phase Supply Unit Fault current circuit breaker (FCCB)
- Cam switch 4 pole
- Fault current circuit breaker 30 mA
- Motor protection switch 6-10 A
- Phase control lamps L1, L2, L3
- Mains cable with Cekon plug
    Power Circuit Breaker Module
    Coupling 0.1/0.3
For mechanical connection of two electrical machines of the 0.1 or 0.3 kW series.
    Set of 10 32 A safety bridging plugs, black
    Safety Bridging Plugs with Tap, black, set of 10
    Safety bridging plugs, yellow/green, set of 10
    Safety connecting leads, 32 A, it contain:-
•    2 each safety connecting lead, red 100 cm
•    2 each safety connecting lead, blue 100 cm
•    2 each safety connecting lead, red 50 cm
•    2 each safety connecting lead, blue 50 cm
•    2 each safety connecting lead, red 25 cm
•    2 each safety connecting lead, blue 25 cm
•    4 each safety connecting lead, black 100 cm
•    6 each safety connecting lead, black 50 cm
•    6 each safety connecting lead, black 25 cm
•    4 each safety connecting lead, black 10 cm
    Safety connecting lead 32 A, yellow/green, set of 10
    Mobile cable holder
    Mobile Experiment Stand,
    Equipment board for experiment stand
    Experiment manual of DC Machines
    Required Software
Asynchronous Machines manual