Code: MOT-STL-0002
Hydraulic Universal Tensile Testing Machine (Universal Test Machines).
Universal Hydraulic Tensile Test Machines are produced to test the
ferrous materials for structural values such as yield strength and
tensile strength. Universal Test Machines can also be used for
compression tests up to the capacity of the machine. Maximum capacity is
600 kN. Can be test flat and round samples. 0-40 mm flat and 8-32 mm
round samples can be tested with a hydraulic jaws that comply with
standards.
Load cell is used for load measurements. Strain measurement is done by
the electronic displacement transducer built in the machine if required
external extensometer fitted to the specimen also can be used for strain
measurement. Strain measurements can be done directly from the
extensometer fitted to the specimen.
Tests can be done automatic by digital control unit or computer. Machine
complete the test with the set pace rate and turns to start position
automatically.
HYDRAULIC GRIPS
Hydraulic grips are very safe. Hydraulic grips come with grip sets for
pulling 8 – 32 mm diameter cylinder samples. The hydraulic grips has an
independent hydraulic power unit with a working pressure of 400 bars.
Jaw faces for flat samples should be ordered separately.
EXTENSOMETER
Different types of extensometers with accuracy of ±0.1% of indicated
value are available depending on requirements. Extensometer can directly
measure deformation of specimens.
Data Acquisition & PC Software
The Universal Testing machine can be controlled (Start, Stop commands)
by a computer with the software given free of charge This
software provides data acquisition and management for compression,
tensile and splitting tensile test throughout the test execution. The
test results certificate includes all descriptive information.
Therefore, test parameters can be set and details about the test carried
out such as client details, test type, specimen type, user info can be
printed out as well as test report and graph.