HS Four Column Frame Automatic Compression Testing Machines.
HS Four Column Frame Automatic Compression Testing Machines are classification of concrete samples, performed according to characteristic and compressive strength specifications of concrete samples. These characteristic and compressive strength specifications are determined with to the done tests results with concrete compression machine.
First, Compression Testing Machines should be carried calibration according to the relevant standards in order to make reliable measurements. Compression machine should be within calibration values class 1 for enables a more reliable test results. Can find follow the concrete compression machine models and technical specifications for the sample specification.
HSF Automatic Compression Testing Machines have been manufactured for consistent testing of concrete cube and cylinder specimens. These machines are produced to between capacity range of 2000 to 3000 kN . Suitable for CE security norms and and EN 12390-3, 12390-4, BS 1881 to standards.
The HS Four Column Automatic Compression Testing Machines can controlled by the "TCM304" digital readout unit or with computer software. Test results, reporting and graphical print can be done with TCM304 software from computer. compression machine heavy duty welded and four column frame are produced two model as.
The suitable vertical clearance for specimen can be adjusted with distance pieces. all model compression machines calibration values are within class 1 starting from 50 kN. Surface hardness 55HRC, flatness tolerance 0.02 mm.
Can be done the following tests with this machines;
1- Compression strength tests.
2- Flexural and splitting tests by using proper accessories.
3- Mortar (Cement) compression tests by using proper accessories.
4- Core testing.
HSF Automatic Compression Testing Machines supplied complete with following accessories;
1- Spacer Discs;
For ASTM Standards;
• Diameter 165 mm x Height 90 mm spacer disc 1 piece
• Diameter 165 mm x Height 50 mm spacer disc 1 piece
• Diameter 165 mm x Height 30 mm spacer disc 2 piece
For EN Standards;
• Diameter 205 mm x Height 90 mm spacer disc 1 piece
• Diameter 205 mm x Height 50 mm spacer disc 1 piece
• Diameter 205 mm x Height 30 mm spacer disc 1 piece
2- Upper Platen;
• Diameter 165 mm (with ball seating assembly) (For ASTM Standards)
• Diameter 300 mm (with ball seating assembly) (For EN Standards)
3- Lower Platen;
• Diameter 165 mm Lower Platen (For ASTM Standards)
• Diameter 300 mm Lower Platen (For EN Standards)
4- Piston;
• Diameter 250 mm Lower Platen (For 2000 kN Capacity Models)
• Diameter 300 mm Lower Platen (For 3000 kN Capacity Models)
5- Automatic Hydraulic Power Pack ;
• Automatic Hydraulic Power Pack, 410 bar (For All Models)
Testable Specimens
• Concrete Cubes: 100 mm, 150 mm, 200 mm concrete cube sample or any other custom cube and prism size can be tested with this machine.
• Concrete Cylinder: 100x200 mm, 150x300 mm, 160x320 mm concrete cylinder samples or any other custom diameters cylinder can be tested with this machine.
Safety Features
• Maximum pressure valves to avoid machine overloading
• Piston travel limit switch
• Emergency stop button
• Front and rear transparent durable plexiglas guards
• Software controlled maximum load value
LCD Data Acquisition Control System
The Data Acquisition Control provides real-time graphical indication. Automatically determines the load rate in accordance with the international standards upon sample type. With the STOP and START buttons, the test will automatically stop or start.
LCD Data Acquisition Control System has different units are available (kN / kgf / lbf). Can do Automatic Load Rate upon Sample Type. Total load and also per area are given. and has real time graph indication. Stops Automatically, when Test is completed. Test results can be send printer to with software or from the thermal printer. Can do calibration easily from 5 points. Manual Control is available. Computer and printer are not included in the price.
Software
The tests and calibration can be done and monitored with a computer by connecting it to the machine. LCD Control unit can connecting with RS232 or USB port to the machine. Using the state of the art software provided with the machine will help performing and managing the tests in a very easy and fast way. By performing the tests via computer, the results can be saved and recalled when required. Reports can be generated automatically by the software and sent to printer.