Code: NAE0042
Solar Photovoltaic Troubleshooting Learning Systems.
Solar Photovoltaic Troubleshooting Learning Systems Main features:
Supply and Consumption at 12 V (DC).
Supply and Consumption in alternating current (AC).
Supply to the network (grid).
Solar Panel (polycrystalline) mounted on an anodized aluminum structure with wheels for mobility, and with calibrated cell to measure solar irradiation. Should consist of 36 high performance photovoltaic cells (35 x 55 mm), with a typical power of 50Wp for a 17Vdc voltage.
Technical data:
Maximum nominal power: 66W. Voltage at maximum power point (Vmpp): 17.8 V. Current at maximum power point (Impp): 3.70 A. Short-circuit current (Isc): 4.05 A. Open circuit voltage (Voc): 22.25 V. Dimensions: 660 x 35.5 x 780 mm. Weight: 3 Kg. approx.
Battery offering optimal performance with low power applications. Set of interconnection cables. Rack for modules allocation.
Solar charge controller with an automatic recognition for operating voltage 12 V or 24 V. It
should monitor several parameters such as voltage, current and charge level of the battery, load
current, status, etc. Additional functions should be activated such as the settings, night light
function and auto-test. The regulator should be equipped with various devices to protect its
electronics, battery and load.
Loads should incorporate two 12 V, 20W lamps, with independent switches.
DC/AC inverter that outputs a sine wave shaped output of 230V/50Hz ± 2% and the nominal
input voltage is 12Vdc. Two different operating modes: continuous mode and ASB mode (Auto
Standby) to reduce the power consumption. It should also be able to provide the user with a
diagnosis system to indicate to the user the status by different flash sequences.
AC Voltage measurements module until 250V. and DC until 250 V (digital multimeter).
Module for measurements of solar irradiation (W/m2) and measurements of current until 10A, with digital multimeter.
Module for 12Vdc battery charger.